DSM570
User’s Manual
Page 34
Revision 1.8.3
“On”. The background will switch to black and the percentage color settings are now used to define
the foreground color.
The “Restore Factory Defaults” menu selection will restore all of the color sets to their factory default
states.
5.2.4.5 Demo Mode
The DSM570 has a demo mode suited for displaying the capabilities of the unit. It causes the
DSM570
to operate in a “simulated data” mode, where the DSM570 will install a set of pre-defined
favorite screens and other configuration and will then display only the internally generated simulated
data and will ignore any data arriving over the NMEA 2000
®
bus. While in demo mode, the DSM570
will display a “Demo” indicator in the upper right-hand corner of the screen. Programming this option
to “On (Show Room Mode)” or “On (Boat Show Mode, No Auto Reset)” will cause the DSM570 to
enter the demo mode while programming this option for “Off (Normal Use Mode)” will cause the
DSM570 to return to using data from the NMEA 2000
®
bus.
In order to be able to demonstrate all of the DSM570
’s capabilities, the unit allows the user to setup
and configure different screens while in demo mode. However, in a show room environment and five
minutes after the last button push (i.e., the customer has walked away the demo unit), the DSM570
will reset itself to the default screens. There are others times where it is important that the DSM570
doesn’t automatically reset after five minutes to the default screens, for example at a boat show
where it is desired to show specific screens while running in the demo mode and th
us the “Boat Show
Mode”.
WARNING
: All data displayed in demo mode is simulated. Do not use this data for vessel monitoring
or navigation purposes.
Figure 18
– Setting the Demo Mode
5.2.4.6 Keyboard Beep
The DSM570 has an annunciator that can be programmed to beep every time a key is pressed.
Conversely, the keypad beep may be disabled if desired.
