Manitowoc GROVE GMK 6400 Operating Manual Download Page 923

Page: 923 / 960

Malfunctions during crane operation

14.5 Emergency operations and programmes

Operating manual GMK 6400

3 112 993 en

14 - 55

201

14.5.4

Emergency operation with the hand-held control

If the power units no longer respond to the operating elements in the crane
cab, you can operate the power units with the hand-held control.

Operating them with the hand-held control is intended for emergencies only
and for bringing the truck crane into a safe state or to shut it down.

Preparations

You have to connect up the hand-held control and start the engine.

Connecting the hand-held control

•

Connect the hand-held control to the con-
nector (

All power units can be operated from this con-
nection.

Information on connecting;

p. 12 - 22.

Starting the engine

•

Press the (

) button once – the engine starts;

p. 10 - 15

Danger of overturning due to deactivated monitoring function

The

RCL is switched off

and the crane operations are not monitored when

operating with the hand-held control. If you move into a critical range, the
truck crane will overturn.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GROVE GMK 6400

Reviews:

Brands by name

Popular brands

Manitowoc GROVE GMK 6400, Operating Manual

Search results

Summary of Contents for GROVE GMK 6400

Reviews:

Brands by name

Popular brands