manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 771

Rigging work

12.6 Outriggers

Operating manual GMK 6400

3 112 993 en

12 - 55

1

2

.0

7.

201

3

 12.6.11            

Levelling the free-standing truck crane

The suspension is deactivated (locked) if the truck crane is in the 

Free on 

wheels

 working position. 

The suspension has to remain switched off until the truck crane is on outrig-
gers.

•

Set down the load.

•

Extend the supporting cylinders until all wheels are just above the 
ground. 

Levelling the truck crane

•

Level the truck crane on outriggers until the lamp (

1

) is the only one light-

ing up in the measuring range 

1°.

Switching on the suspension 

•

In the driver's cab, open the 

Level adjustment system

 submenu – button 

t

•

Press the (

2

) button once - dot is 

green

. 

The symbol (

1

) is 

green

 if the suspension is switched on.

s

G

Danger of overturning if the supporting cylinders are operated unevenly 

Extend or retract the supporting cylinders as evenly as possible. 
This prevents the truck crane from overturning when operating individual 
supporting cylinders.

G

Danger of overturning when switching on the suspension

You may under no circumstances switch on the suspension as long as the 
rigged truck crane is on wheels. The suspension struts would be suddenly 
pressed together and damaged, and the truck crane could overturn when 
switching on the suspension.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands