Manitowoc GROVE GMK 6400, Operating Manual

Page: 560 / 960

Starting/turning off the engine – for crane operation
10.1 When starting the engine for the first time of the day
10 - 10 3 112 993 en Operating manual GMK 6400
1
2
.0
7.
201
3
10.1.7 Checks after starting the engine
•
Check the lamp ( 1 ) on the
ECOS
control unit immediately after starting the
engine.
The lamp (
1 ) must go out approx. 10 seconds after starting the engine.
•
Press the button ( 1 ) once. This opens the Warning submenu.
•
If the symbol ( 2 ) is red , switch off the engine immediately.
•
Check the oil level;
à
Maintenance manual .
•
Add oil if necessary. If the error message persists, refer to Manitowoc
Crane Care
.
If other symbols in this menu are displayed in red;
à
Warning submenu
,
p. 11 - 111.
•
Also check the following lamps on the side panel.
– If the lamp ( 2 ) does not go out or lights up while the engine is running,
switch the engine off and look for the cause.
– If the lamp ( 1 ) does not go out or lights up while the engine is running,
there is a malfunction in the flame start system.
à
Malfunctions in the engine , p. 7 - 27
More information can be found in the
Monitoring
submenu;
à
p. 10 - 11.
S
Risk of damage to the engine
If the lamp ( 1 ) does not go out after about 10 seconds, perform the follow-
ing check and, if necessary, turn off the engine immediately.
The engine can be damaged by running it when the oil pressure is too low.