manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 167

Starting/turning off the engine for driving

4.2 Turning off the engine

Operating manual GMK 6400

3 112 993 en

4 - 25

1

2

.0

7.

201

3

 4.2            

Turning off the engine

 4.2.1            

On the ignition lock/with hand-held control/on the outrigger 
control units

If the temperature of the coolant is very high, let the engine run for another 
one or two minutes at increased idling speed. 

If the hand-held control is not connected:

•

Turn the ignition key to position 

0

 – the engine will stop.

If the hand-held control is connected:

•

Press the button (

1

) – the engine goes off.

In this case it is not possible to switch off the engine with the ignition lock.

On the outrigger control units, if the hand-held control is not connected:

•

Press the button (

1

) – the engine goes off.

After parking

If you want to park the truck crane; 

à

p. 5 - 53.

G

Risk of accidents due to the fact that the truck crane cannot be steered.

Only turn off the engine once the truck crane is at a standstill. If you remove 
the ignition key, the steering will lock and you will lose control of the mov-
ing truck crane. 

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands