manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 259

Driving

5.7 Towing a trailer

Operating manual GMK 6400

3 112 993 en

5 - 87

1

2

.0

7.

201

3

Checking the 
braking force

When a trailer is coupled and connected, you can check whether the braking 
force of the truck crane alone is sufficient for braking the truck crane and the 
trailer on uphill or downhill roads (e.g. when a brake hose has burst).

To check this, you can release the parking brake of the trailer on its own.

•

Engage the parking brake. 

•

Press the lever in and pull it further down. 
As long as you hold the lever in this position, the parking brake on the 
trailer is released – the parking brake on the truck crane remains engaged.

This allows you to check whether the braking force of the parking brake on 
the truck crane alone is sufficient to brake the truck crane and the trailer.

•

Let go of the lever. The lever latches into position and the parking brake 
of the trailer is engaged.

S

Risk of accident from truck crane moving unintentionally 

When parking on downhill or uphill roads, always secure the truck crane 
and trailer against rolling away with wheel chocks in addition to the parking 
brake. Even when checking the parking brake has delivered a positive 
result. Observe the corresponding regulations in your country when doing 
this.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands