manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 355

Malfunctions in driving mode

7.5 Wheels and tyres

Operating manual GMK 6400

3 112 993 en

7 - 17

1

2

.0

7.

201

3

 7.5.2            

Inflating the tyres yourself

In emergencies you can inflate the tyres with the compressed air system of 
the truck crane if an appropriate filling hose is available.
The tyres can be inflated up to a maximum pressure of about 8 bar (116 psi). 
This pressure might not correspond to the prescribed tyre pressure, 
depending on the tyres; 

à

Tyres

, p. 1 - 14. 

Always drive directly to a service station or garage and adjust the tyre pres-
sure as soon as you have inflated the tyres yourself. 

The filling hose has a tyre inflator connection (

2

) and a connection (

1

). 

Connecting the 
filling hose 

•

Remove the caps (

3

) and (

4

). 

•

Fasten the connection (

1

) to the filler con-

nection (

2

). 

You can now inflate the tyres.

s

S

Risk of accident due to excessive tyre pressure

If the maximum pressure is above the specified tyre pressure, inflate the 
tyres up to the maximum specified pressure. 
This prevents the tyres from becoming damaged and bursting while driv-
ing.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands