manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 356

Malfunctions in driving mode
7.5 Wheels and tyres

7 - 18

3 112 993 en

Operating manual GMK 6400

1

2

.0

7.

201

3

Inflating the tyres 

The compressed air system's maximum operation pressure of 8 bar 
(116 psi) can only be reached with the engine running. 

•

Start the engine; 

à

p. 4 - 16.

•

Fasten the tyre connection (

1

) to the tyre 

valve. 

•

Press the button on the tyre connection and 
inflate the tyre. 

•

Disconnect the tyre connection (

1

) from the 

tyre valve.

Removing the 
filling hose 

Before driving, you must remove the filling hose from the filler connection.

•

Remove the connection (

1

) from the filler 

connection (

2

).

•

Close the filler connection and the connec-
tion with the caps (

3

) and (

4

).

•

Stow the filling hose away.

•

Drive to a service station or workshop and 
adjust the tyre pressure. 

S

Risk of damage to the compressed air system 

Always close the filler connection with the cap. 
This prevents damage to and contamination in the compressed air system. 

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands