Manitowoc GROVE GMK 6400, Operating Manual

Page: 690 / 960

Crane operation
11.5 Working range limiter
11 - 120 3 112 993 en Operating manual GMK 6400
1
2
.0
7.
201
3
Entering the permissible slewing range
You must enter the slewing angles A and B separately.
Slewing angle A :
•
Press the ( 3 ) button once.
Bar ( 1 ) is red – input on. Cancel input – press
button
ö
once
•
Slew the main boom ( 4 ) to the shutdown
point from the right, e.g. value ( 2 ) 45°
•
Press button
Ö
once
– The slewing angle A will be displayed
– The value ( 2 ) will be accepted as the limit
( 3 )
– The bar ( 1 ) goes out
Slewing angle B :
•
Press the ( 3 ) button once.
Bar ( 1 ) is red – input on. Cancel input – press
button
ö
once
•
Slew the main boom ( 4 ) to the shutdown
point from the left, e.g. value ( 2 ) 100°
•
Press button
Ö
once
– The slewing angle B will be displayed
– The value ( 2 ) will be accepted as the limit
( 3 )
– The bar ( 1 ) goes out
G
Risk of accident due to incorrectly set slewing angles
Always slew the main boom to the shutdown point from the right with
slewing angle
A and from the left with slewing angle B .
This prevents slewing into the impermissible range from being enabled.