manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 804

Rigging work
12.7 Rigging/unrigging the counterweight

12 - 88

3 112 993 en

Operating manual GMK 6400

1

2

.0

7.

201

3

 12.7.11            

Raising and lowering 10 t counterweight blocks with a 
mounted auxiliary hoist

You will require the following equipment with a sufficient load bearing 
capacity:

– An auxiliary crane (depending on the rigging mode of the truck crane)

– Suitable lifting gear and guide ropes.

à

Dimensions and weights of removable parts

, p. 1 - 10.

•

Release and remove the securing devices on 
the 10 t counterweight blocks; 

à

p. 12 - 79.

•

Attach the lifting gear (

1

) to the slinging 

points provided on the 10 t counterweight 
blocks; 

à

p. 12 - 61.

•

Attach the lifting gear into the hook block.

•

Carefully raise the 10 t counterweight blocks 
and set them down on a suitable base.

•

Secure the new counterweight combination; 

à

p. 12 - 79.

S

Risk of damage to the auxiliary hoist and truck crane!

Sling the 10 t counterweight blocks only at the slinging points provided. 
Always use lifting gear with a sufficient lifting capacity. This prevents 
damage to the auxiliary hoist or the truck crane.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands