manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 151

Starting/turning off the engine for driving

4.1 Starting the engine from the driver's cab

Operating manual GMK 6400

3 112 993 en

4 - 9

1

2

.0

7.

201

3

Dual tank

The dual tank system makes it possible to operate the truck crane in driving 
mode and crane operation mode with different types of fuel, provided this 
complies with the local regulations in the country in which you are working.

The fuel tank (

1

) is filled with the fuel for driv-

ing.

The fuel tank (

2

) is filled with the fuel for crane 

operation.

•

Open the filler neck to refuel.

•

Refill the appropriate fuel in due time, and 
close the tanks (

1

) and (

2

) with the cap. 

Leave sufficient space for the fuel to be able 
to expand.

Switching over the fuel supply

When fitted with the dual tank system, the fuel 
supply is automatically switched over when 
you start the motor from the crane cab.

– The driving fuel tank is in use when the 

Dual 

tank

 indicator lamp (

3

) is out.

– The crane fuel tank is in use when the 

Dual 

tank

 indicator lamp (

3

) is illuminated. 

s

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands