manualshive.com logo in svg

Manitowoc GROVE GMK 6400, Operating Manual

Share
Download
Manitowoc GROVE GMK 6400 Operating Manual Download Page 854

Rigging work
12.10 Other rigging work

12 - 138

3 112 993 en

Operating manual GMK 6400

1

2

.0

7.

201

3

Installing

•

Insert the camera (

2

) into the clamp (

1

) and 

secure it with the retaining pin.

•

Insert the plug (

4

) in the socket (

3

).

•

Lay the cable (

5

) in such a way that it is not 

damaged.

Removing

•

Pull the plug out of the socket (

3

) and close 

the socket with the cap.

•

Remove the camera (

2

) from the clamp (

1

) 

and put the retaining pin in the holder (

1

).

Switching on

•

Switch the ignition on.

•

Press switch (

3

) down.

•

Press the (

2

) button once.

The lamp (

1

) lights up. The image appears 

on the monitor after a few seconds. If an 
image does not appear; 

à

p. 14 - 9.

Switching off

•

Press the (

2

) button once.

The lamp (

1

) and the image go out.

•

Press switch (

3

) up.

Summary of Contents for GROVE GMK 6400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands