Man D2862 LE221, Repair Manual

Page: 177 / 420

TURBOCHARGING
Removing the turbocharger
Detaching the bellows hose
• Loosen hose clamps (1) and (3) and push onto the
bellows hose (2)
• Remove the bellows hose (2) with hose clamps (1)
and (3)
Detaching the heat shield
• Mark the installation position of the mounting bolts
(1), (3), (4) and (5)
• Unscrew the mounting bolts (1), (3), (4) and (5)
and remove with washers
• Remove the heat shield (2)
Detaching the vent line
• Remove the jubilee clip (3) with Hose clamp pliers
for jubilee clips [62]
• Pull the vent line hose (1) off the hose port (2)
Detaching the charge air manifold
• Loosening the T-pin clamp (4)
• Pull off the charge air manifold (3) and remove with
T-pin clamp (4), O-rings (2), (5) and guide band (1)
• Clean the sealing surfaces
Detaching the exhaust manifold
• Unscrew and remove the mounting nuts (3)
• Remove the exhaust manifold (2) and seal (1)
• Clean the sealing surfaces
AE6 3st edition 175