WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
5
14/02/2019
1. 2
Detergent
The 5 litre detergent container is accessed by opening the bottom door. Only use Malmet approved detergent (See technical
data for detergent details)
1.
Pull handle on detergent door and open
2.
Unscrew cap and pull out with suction hose (let hose hang in detergent chamber)
3.
Remove empty bottle and replace with full bottle
Note: Leave cap on new bottle until in position
4.
Remove cap on new bottle and fit existing hose and cap, make sure suction hose is at bottom of bottle
5.
Close detergent door
6.
Restart device operation as normal
7.
Check fill level indicator on display. Should show as
Note: Do not drop detergent container onto base plate. This may result in damaging the load cell.
Safety Gloves and Goggles must be worn when changing detergent. Current Safety Data Sheet for Malmet Detergent is
available in pdf format from Malmet’s website. www.malmet.com.au