WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
25
14/02/2019
5.0 Maintenance
Maintenance, preventative or breakdown, is to be completed by a qualified person. Failure to comply with this may result in
unsafe conditions.
Preventative maintenance must be completed as per instructions below. Failure to comply may result in warranty claims being
rejected.
The Malmet Bedpan/Urinal Bottle and Utensil/Bowl Washer Disinfector is self-cleaning; however, proper care should be taken to
ensure that the device is cleaned and maintained in accordance with maintenance instructions for Malmet Bedpan/Urinal Bottle and
Utensil/Bowl Washer Disinfector, regulatory and common sense practices.
Preventative Maintenance Schedule
5.1
Daily Maintenance (Operator or Maintenance Technician)
a)
Run the Bedpan urine cycle to bring the device to operating temperature and disinfect the internal wash chamber area
(do not load any items)
b)
Wipe out the inside of the door and gasket with warm water and detergent. A wipe with disinfectant is also desirable
c)
Wipe over external stainless steel panels with a stainless steel cleaner (do not get cleaner into the opening of the USB
port)
d)
Wipe the front control panel with a soft cloth and mild detergent as necessary. Care should be taken not to damage the
digital display or to activate a cycle (turn off power at control panel)
e)
Check level in detergent bottle, replenish as necessary
5.2
Bi-Monthly Maintenance (Maintenance Technician)
a)
Check for steam or water leaks. Tighten hose clamps where necessary
b)
Check flush nozzles for free rotation
c)
Remove level probe in steam generator tank and water tank, clean off any residue build up
d)
Remove temperature probes in steam generator and chamber and clean off any residue build up
e)
Visually inspect build-up of residue in steam tank, especially in locations with poor water quality
f)
Check filter in the water inlet solenoid valve and clean as necessary
g)
Check all electrical connections, and tighten if necessary
Stainless Steel Maintenance/Care
Under normal usage, stainless steel products require regular cleaning with a soft clean rag moistened with a mild detergent followed
by a water-moistened clean rag and then a dry rag
The #4 satin finish steel should be protected against Muriatic acid and caustic or abrasive materials and harsh cleaning detergents.
In the event such agents cause discoloration, polish with a stainless steel cleaner such as 3M Stainless Steel Cleaner & Polish and a
pad
