WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
50
14/02/2019
Malmet (Australia) Pty Ltd
Website: www.malmet.com.au
Warranty Statement
This warranty is provided, and operates in addition to, the statutory warranties Malmet (Australia) Pty Ltd
("
Malmet
") provides to any consumer under the Australian Consumer Law (if applicable) or by virtue of
any other applicable legislation.
Subject to the following conditions, we provide, from the date of purchase, the following warranty on Malmet
devices and spare parts for products manufactured by Malmet and sold in Australia:
• Functional components found within the device to be defective in workmanship or material will be
repaired or replaced free of charge subject to the periods of warranty specified in the table below.
• A decision regarding whether the defective components will be repaired or replaced will be determined
at the sole discretion of Malmet or its authorised agents or representatives.
• The structural warranty covers any structural components within the device, which fail to perform
their intended function due to faulty manufacture or deterioration within the warranty period.
• Parts replaced in devices under warranty are warranted for the balance of the original warranty
period for that device.
Malmet Devices
Device Components
Parts & Labour
Structural Guarantee
2 Years from Date of Purchase
All other components
2 Years from Date of Purchase
Malmet Spare Parts
1 Year from Date of Purchase
The installer is responsible for the correct installation, start up and demonstrating the operation of the product. They
are also responsible for issuing the relevant certificates of compliance (these may differ from state to state).
CONDITIONS AND EXCLUSIONS
• Equipment must be installed and commissioned according to our instructions (outlined in our Operation,
Maintenance and Installation Manual) and operated to the purpose it was designed.
• Equipment must be serviced as instructed in the Operation, Maintenance and Installation Manuals.
• To the extent permitted by law, this warranty shall not cover damage, malfunction or failure resulting from accident,
misuse or misapplication, improper or unauthorised repair, neglect or modification or use of unauthorised
replacement parts or accessories, inclusive of detergent, or improper voltage. The warranty may be void if the
serial number is removed or altered.
• Parts damaged in transit back to Malmet Leeton due to poor packaging could result in warranty claim being rejected
in part or in full.
• Any part tampered with or which has been altered by unauthorised repairs and/or modifications will be
rejected under a warranty claim to the extent permitted by law (to the extent the Australian Consumer
Law applies, Malmet will assess the extent to which the tampering or unauthorised repairs contributed to
the failure).
• Reasonable access must be allowed for maintenance. If any additional equipment is needed to provide
access to the device, this must be provided (and paid for) by the owner.
