WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
24
14/02/2019
4.2
Detergent Warnings
First Warning
When last full segment is showing, ‘LOW DETERGENT’ will flash (there is approx. 1.5 to 1.6 litres in bottle)
Second Warning
When no full segments are showing ‘EMPTY DETERGENT’ will flash, there is approximately 750mL to 1litre in bottle
Third warning
Fault 302 - detergent time out (no detergent in bottle)
When full bottle is installed the detergent line will require purging (see 5.7)
FAULT 302
4.3
Fault Indication
In the event of a Power failure or operation failure during cycle the device will go to fault. The display will show the selected cycle
the device was operating in when power failed or operation failed. After fault has been rectified a Purge/Rest will be required to
start the device
FLT XXX
flashing
Audible Buzzer will beep
FAULT XXX
FAULT 302
