WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
4
14/02/2019
1.0 Design Parameters
The Malmet Bedpan/Urinal Bottle and Utensil/Bowl Washer Disinfector has been designed within the following parameters
:
1.1
Operating Cycles
Three available operating (cleaning and disinfection)
Urinal Bottle / Bedpan
Load: capacity:
2 x small slipper pans, 2 x large slipper pans, 2 x standard bedpans and 4 x standard male and
female urinal bottles
Cycle:
1.
Flush
8 to 12 sec
2.
Cold water wash
2 min
3.
Hot water wash with detergent
2 min
4.
Hot water rinse
35 sec
5.
Disinfection
1 min at 90˚C
6.
Cool down
20 sec
Urinal Bottle only
Load capacity:
4 x Standard male and female urinal bottles
Cycle:
1.
Cold water
2 min
2.
Hot water wash with detergent
2 min
3.
Hot water
35 sec
4.
Disinfection
1 min at 90˚C
5.
Cool down
20 sec
Bowl / Utensil
Load capacity:
2 x large bowls (345Dia to 305Dia), 3 x medium bowls (240Dia to 210Dia), 6 kidney dishes (sizes
300 x 50, 255 x 50 and 220 x 43 – held in kidney rack holder)
Smaller kidney dishes fit into a basket with a smaller open ended trays and utensils.
Cycle:
1.
Cold water wash
2 min
2.
Hot water wash with detergent
2 min
3.
Hot water rinse
35 sec
4.
Disinfection
1 min at 90˚C
5.
Cool down
20 sec
Note:
These times do not include filling and heating. These times comply with AS 2945. See Technical data for full cycle
times.
a)
Two bedpans with lids and four urinal bottles can be emptied, cleaned and disinfected during each automatic cycle.
b)
The cradle is designed to ensure that utensils are not dislodged during the cleaning cycle; the contents are emptied during
door closure.
c)
The chamber and door are self-cleaning and do not permit water or soil to remain after a properly completed cycle. Steam
disinfecting ensures all internal surfaces are totally clean and safe.
d)
The bedpan flush cycle:
i)
Removes the heavy soil
ii)
Clears the trap
