WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
30
14/02/2019
5.5
Purge Reset (Operator)
1.
Turn power OFF
at control LCD display
2. Turn power ON
at control LCD display
3. The display will alternate between the current fault/s and “PURGE”, press SELECT
to start the Purge Reset cycle
When purge is complete the previous cycle will automatically start to ensure the load is disinfected
If the fault reoccurs contact maintenance or service provider
5.6
Purge Detergent Line (Operator)
1.
Turn power OFF
at control LCD display
2. Turn power ON
at control LCD display
3. The detergent line will automatically purge if necessary for a predetermined time or until the detergent is detected
If detergent fault is not cleared check detergent level and repeat
If the detergent continues to fault contact maintenance or service provider
