WDS
Operation, Maintenance and Installation Manual
Issue 11
Page
36
14/02/2019
5.11 User Menu and Test Mode
After normal Power On mode (not restart attempt), the operator can place the system into the MENU and test mode
To enter the MENU model, press ENTER and simultaneously press SCROLL and hold for 5 seconds
The display will show “MENU”
5.11.1
Menu Levels
Once into the menus, the SCROLL and SELECT / ENTER buttons generally become operative with the LCD displays in
following way:
For LEVEL 0 and LEVEL 1
The SCROLL button moves the selection down within the Same Level
The SELECT button the selects the option and moves to the next level down the chain
Pressing SELECT on the EXIT option moves the selection back up to the previous higher level
At the SELECT Level
The SCROLL button moves the selection down within the Same Level
For incrementing fields SCROLL behaves as follows:
Short Press SCROLL – increments (or decrement) at slow rate 1 per second
Hold SCROLL (> 1 second) increments (or decrement) at fast rate 5 per second
Long Break (>5 second) reverses direction
The SELECT button then selects and SAVES the option and moves back up to previous higher level
The table below indicates the Text displayed in the 7 Char Text Display field
LEVEL 0 – just shows the Level Text
LEVEL 1 – alternates the Level 1 Text with the Current Set Value in the SELECT field
A general timeout of 180 seconds for no buttons pressed will EXIT the menus and return to the main POWER OFF
state
