Log a point with a specific point code:
●
Select a point code from the list.
●
With a code chosen (the one marked blue at the top of the list), tap ‘Log point’ to log a point
with that code.
●
You will get a confirmation message that you logged the point with information about the
point number, point code, and coordinate.
●
You can press undo if you regret your last logging. The confirmation pop-up will disappear
after approximately 10 seconds.
●
The last used point code will remain active until it’s changed.
Own log codes
Menu > Point logging > Other codes > Own codes
You can create your own point codes this way:
●
Tap ‘+’
●
Name your code
●
‘OK’ to save
The new code is now stored under ‘Own codes’. The new code is automatically selected as the
default code for point logging.
Common code is a project-related code group to contain the codes within the same project.
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
49
