Symbols in the top bar
Indicating connection to the internet. The symbol appears white when
connection is established and grey if no connection.
Indicates the number of visible satellites. The dilution of precision (DOP) as
well as the coordinate quality (CQ) state how errors in measurements will
affect the final estimation. Generally, DOP should be kept under 1.0 and CQ
below 4 to maintain the highest possible confidence level. Tapping the icon
will bring you to the GNSS settings.
Indication of synchronization of data between server and machine.
An indication that you have remote support from Makin.
This will usually be in connection to a remote support case where you will be
notified.
Bring your machine back to the center of your screen after zooming and
panning.
Placed in the upper right corner. Tap for change of screen, depending on the
work you are doing, and what you want to have in focus.
Indicating project offset. The symbol appears when a project
offset is applied to the active project
Shortcuts in the quick keys menu
Tap to access the ‘References’ dialog. Another way to access this dialog is to
select an element in the 3D model. Long hold to access the ‘Project’ menu.
The name of the current point code is shown on the icon’s label. Tap to
quickly log a point, which will be stored alongside general as-built data. Long
hold to access ‘Point codes’. You need to select a point code before logging a
point.
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
18
