5. Horizontal distances from present stationing
to the end points of the active line segment
(colored gray). The line will be extrapolated,
if the tool point is in front or behind end
points. In this case, the value will be
negative to the closest end point.
12. Length of line segment
6. Name of selected stakeout line.
13. Height difference of the line segment.
7. Type of selected reference (arc, circle, line,
polyline, road line)
14. Slope of the line segment.
Create point from coordinate
Press on References (red circle)
Press the + (red circle)
Press the Point (red circle)
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
32
