Measurement
: Shows measurements between tool point and selected reference for stakeout.
Reference
: Shows information about the entire selected reference for stakeout.
Segment
: Shows information about the active line segment (gray line). Only shown for lines that contain
segments.
1. Horizontal distance between tool point and
selected reference. Measured
perpendicular to the line.
8. Horizontal length of stakeout line.
2. Vertical distance between tool point and
selected reference.
9. Length of stakeout line.
3. Inclination between selected reference and
tool point.
10. Segment type can be line, arc and clothoid
(spiral, transition curve).
4. Stationing of the selected line.
11. Horizontal length of line segment.
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
31
