Screen Display: COOL & SHUT DOWN
Description:
This screen appears whenever you press the ON/OFF
button to turn the grill OFF. The fan will continue to run to help burn all of
the unburnt pellets in the firepot, and help to cool down the grill. The cool
down sequence will run for approximately (20) twenty minutes. At the end
of the sequence, the grill will completely shut off.
Settings:
There are no user settings for this feature. The cool down cycle
can be over ridden by pressing any button on the Pellet Boss® and the
grill will completely shut off without going through the cool down cycle.
FUSE HOLDER
The fuse protects the Pellet Boss® board when a component failure
occurs. This fuse is located on the back side of the control board. Before
you access the fuse, un-plug the grill from the power outlet. Remove the
(6) six screws on the front left and right sides of the Pellet Boss®. The
fuse is located on the back left hand side of the Pellet Boss® and is
protected by a clear plastic cover over the fuse. This cover needs to be
removed to examine and access the fuse.
Always use a FAST BLOW 4.0 AMP fuse of the same length and
diameter when replacing the fuse. (If you have not replaced the fuse
before, you will find a spare one stapled to the inside back cover of this
manual.
NOTE: When removing the Pellet Boss® from the grill, be careful
that you don't accidently unplug any of the connections on the back
of the board.
27
TEMPERATURE/MEAT PROBE INPUTS
You may use up to (3) three Temperature/Meat Probes to monitor the
internal temperature of the food you are cooking. Put the probe plug into
any of the (3) three Temperature/Meat Probe
inputs. Run the probe through the “mouse hole”
on the front left side of the grill opening and insert
the probe end into your food. The internal
temperature of the food will be displayed as
PROBE 1, 2 or 3, depending on which input you
have selected.
NOTE: Keep the Pellet Boss® out of prolonged, direct sunlight.
Otherwise it may damage the Liquid Crystal Display (LCD).
28
T
HERMOCOUPLE
M
OLEX
P
LUG
W
I
-F
I
/B
LUE
T
OOTH
C
HIP
R
ECEPTACLE
A
LARM
M
ODULE
U
PDATE
C
ONNECTION
H
OPPER
S
WITCH
F
USE
P
OWER
I
GNITER
A
UGER
F
AN
G
ROUNDING
L
UG
®
Pellet Boss
PELLET BOSS ® REAR VIEW
Use this diagram to familiarize yourself with each of the components and
plug receptacles found on the back of the Pellet Boss® control board. In
the event that you will need to do any grill repairs, you will have a better
idea where to locate and correctly plug in a component.
Any time you need to remove the Pellet Boss® from the grill, do so
carefully so that you do not pull out any of the connections or plugs on
the backside of the control board.
Summary of Contents for EP-429-2G
Page 1: ...Front Cover...
Page 9: ...6 BBQ DIAGRAM...
