16 Series, Model - 2816 4WD
T
ransmission
Oil
Change
Oil Change Interval
............................................................
Every 200 hours
T
o
change the transmission oil, use
the following procedure:
1
.
Put the tractor on level ground,
apply the park brake and stop
the engine. Move the range shift
lever to L position.
2
.
Remove the drain plugs from the
transmission case.
NOTE:
For best results, drain the
oil when the oil is warm.
3.
Replace the hydraulic filter
. See
Hydraulic Filter in this manual.
4
.
Install the drain plugs with a seal
washer and tighten to a torque of
39 to 44 Nm (29 to 33 lb ft).
5
.
Add the recommended oil
through the fill hole and check
the oil level.
6. Start the engine and check for
leaks.
7
.
Recheck the oil level after
stopping the engine. If the oil
level is low
, add oil up to the
specified level.
DRAIN PLUG
S
GEAR DRIVE
GEAR DRIVE
FILL HOLE
11
0
LUBRICA
TION/FIL
TERS/FLUIDS
___________________________________________
