16 Series, Model - 2816 4WD
SPECIFICA
TIONS_______________________________________________________
T
ype ...........................................................
Three Cylinder
, Four S
troke Cycle,
V
alve in Cylinder Head, Cross
Flow Porting
Firing Order
....................................................................................1 — 3— 2
Bore
................................................................. 78mm (3.071 inch)
S
troke.
....................................................................92mm (3.622 inch)
Piston Displacement
.......................................................1318 cm
3
(80.43 Cubic inch)
Compression Ratio.........................................................................22.0 to 1
Governor Engine S
peed Without
Load............................... 2730 to 2780 RPM
Rated Engine S
peed........................................................................ 2600 RPM
Engine Idle S
peed................................................................. 950 to 1000 RPM
*Maximum Horsepower (Manufacturing Rating)
................................................................. 28HP at 2600 RPM
V
alve Clearance (Int
ake and Exhaust Cold Engine)
.......................................................0.25mm (0.010 inch)
IMPORT
ANT
:
V
alve clearance adjustment must be made when the
engine is not running and is cold.
General
DIESEL ENGINE
Engine Lubrication System
Oil Pressure
..........
..........................392kPa (57PSI) at 2500
Engine RPM with 10W–30 Oil
at 90°C (194°F)
Fuel System
Fuel Injection Pump.............................................BOSCH M Plunger In Line
NIPPONDENSO
Injection Pump
T
iming.
..................... 17 Degrees Before
T
op Dead Center (BTDC)
Fuel Injectors
.
..............Throttle T
ype, NIPPONDENSO
*Manufacturer
’s
estimate under st
andard condition and subject to change without prior notice.
20
