16 Series, Model - 2816 4WD
Close the fuel shut-of
f valve.
Install new filter element. Assem-
ble filter cup and retaining nut to
filter body
.
NOTE:
Be sure O-ring is in
place on the filter body and filter
cup.
Clean the outside of the filter
body and cup to prevent dirt or
foreign materials from entering
the system.
Loosen the filter cup retaining
nut. Remove filter cup. Remove
old filter element and clean inside
of filter cup.
Open the fuel shut-of
f valve and
vent the fuel system. See Fuel
System Air removal in this
manual.
STEP 6
Clean fuel of
f the engine. Start
the engine to check for fuel leaks
around the filter
, lines and fit-
tings.
NOTE:
If the engine does not
have power with a full load after
you have done the filter service
and removed the air from the
system, see your Dealer to find
and correct the cause.
Fuel
Filter
Element
Replacement
To
replace
the
filter
element,
use
following
procedure:
OPEN
STEP 5
STEP 3
R
E
TAINING NUT
STEP 2
STEP
1
CLOSE
FUEL
SHUT
-OFF V
A
LV
E
STEP 4
FIL
TER ELEMENT
103
LUBRICA
TION/FIL
TERS/FLUIDS
___________________________________________
