16 Series, Model - 2816 4WD
Engine
Oi
l
Change
T
o
change the engine oil, put the tractor on level ground and stop the
engine. Change the engine oil as follows:
NOTE:
For best results change the oil while the engine is still warm.
DRAIN PLUG
OIL FILL CAP
1
.
Remove the oil pan drain plug and drain the oil from the engine.
2
.
See Engine Oil Filter in this manual, if the filter is to be changed.
3
.
Install the drain plug in the oil pan. T
ighten the plug to a torque of 50
to 60 Nm (36 to 43 lb ft).
4
.
Put the correct type and amount of new oil into the engine. See
Engine Oil Selectio
n
in this manual for recommended oil type.
IMPORT
ANT
:
Do not use the oil level dipstick as a guide when you fill
the engine crankcase with oil. Always measure the amount of oil you
install.
5
.
Start the engine. Operate the engine for five minutes at 1200 rpm.
Check for oil leaks at the filter base and drain plug.
6.
Stop the engine. W
ait approximately five minutes for the oil to return
to the oil pan. Check the oil level on the dipstick and add oil if
needed.
96
LUBRICA
TION/FIL
TERS/FLUIDS
___________________________________________