16 Series, Model - 2816 4WD
The Dual Clutch system permits the operator to stop the tractor motion
while maintaining PT
O operation. (Live PT
O
)
DUAL
CLUTCH
To
o
p
erate the Dual Clutch system, use the following procedure.
1.
Push the clutch pedal fully to position 1. Move the gear shift lever
, the
rear PT
O control lever and the Mid PT
O control lever
, if equipped, to
the correct operating positions.
2.
Slowly release the clutch pedal to position 2. In this position, the PT
O
shaft will rotate but the tractor does not move.
3.
Hold the clutch pedal in position 2 until the engine speed becomes
constant.
4
.
Slowly release the clutch pedal to position 3 to start the tractor in
motion.
5.
T
o
stop the tractor while keeping the PT
O operating, push the clutch
pedal halfway to position 2.
6.
T
o
stop the tractor and PT
O, push the clutch pedal fully to position 1.
IMPORT
ANT
:
Push the clutch pedal to position 2 and stop the T
ractor
before shifting Range Lever
.
NOTE:
The gear shift lever
, the range lever
, the MFD lever or creep
lever
if
equipped can be operated with the clutch pedal pushed to
position 2. Be sure to fully push the clutch pedal to position 1 before
moving Rear PT
O control lever or the Mid PT
O control lever
, if equipped.
POSITION 3
TRANSMISSION AND
PT
O
ENGAGED
POSITION 2
TRANSMISSION DISENGAGED
PT
O
ENGAGED
POSITION 1
P
TO AND TRANSMISSION
DISENGAGED
56
OPERA
TING INSTRUCTIONS
____________________________________________
