manualshive.com logo in svg

Magnum Energy ME-RTR, Owner'S Manual

Share
Download
Magnum Energy ME-RTR Owner'S Manual Download Page 58

53 

© 2010 Magnum Energy, Inc.

5.0 Operation

5.1.3 ON/OFF Pushbuttons

ON/OFF INVERTER:

 This button toggles the inverter function on and 

off. The green INV LED turns on and off with the button.

ON/OFF CHARGER:

 This button toggles the charger function on and off 

whenever the charger is actively charging. The green CHG LED turns on and 

off with this button. This button is also used to initiate an Equalize charge. 

For more information on using the Equalize charge feature, see Section 5.2.2 

and the Equalizing mode information on page 60.

5.1.4 Menu Pushbuttons

These 

fi

 ve pushbuttons provide quick access to menu items for con

fi

 guring, 

monitoring, and troubleshooting your inverter/charger system.

PORT:

 This button scrolls through the active communication ports. 

Pressing the PORT button will skip over non-active or empty ports allowing 

quick access to connected devices.

CTRL:

 This button contains the 

ACIN CONTROL

, 

CHG CONTROL

, and 

GEN CONTROL

 menus. The CTRL button gives you quick control of the main 

functions of the inverter/charger.

Info:

 If a ME-ARC50 is connected to the router, the CTRL button 

on the ME-ARC50 is defeated. Any desired function from the 

CTRL button must be accessed from the router.

METER:

 This button provides meter information on the inverter/charger, 

and the ME-AGS-N and ME-BMK/ME-BMK-NS (if connected). See Section 

3.2.3 for more detailed information.

SETUP:

 This button allows the router, the inverter/charger, and any 

connected accessory to be con

fi

 gured to your speci

fi

 c system preferences. 

See Section 3.2.4 for more detailed information.

TECH:

 This button allows you to access menu selections that can help 

service personnel with troubleshooting, and also allows the factory default 

settings for the inverter/charger and any connected accessory to be restored. 

See Section 3.2.5 for more detailed information.

5.1.5 Rotary SELECT Knob

The rotary SELECT knob is similar to a dash radio knob and is used to easily 

view and select various menu items and settings displayed on the LCD screen. 

Turn the rotary knob clockwise/counterclockwise to view the different menu 

items and the available inverter/charger, ME-AGS-N, and ME-BMK/ME-BMK-

NS settings. Press the rotary knob to select a menu item or to save a setting 

once it is displayed on the LCD screen (hold down the SELECT knob for 10 

seconds to refresh the LCD display).

Info:

 All adjustable inverter/charger settings in the router 

(except for 

01B Contrast

, 

01C Backlight

, and 

03 AGS Control

 

— which revert back to default) are saved in non-volatile memory 

until changed — even if an inverter reset is performed or if all 

power to the router or inverter is removed.

CAUTION:

 An accessory that is networked to the inverter 

may have adjustable settings that revert back to default if all 

power to the inverter is lost. Refer to the particular accessory’s 

owner’s manual to determine if any setting for the accessory 

is affected.

•

•

•

•

•

•

•

Summary of Contents for ME-RTR

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands