© 2010 Magnum Energy, Inc.
22
3.0 Setup
3.2.4 SETUP Button
Pressing the SETUP button provides access to the menu items and settings
that enable you to con
fi
gure the router display, the inverter/charger, and any
connected accessory. Review each menu item to determine if you need to
adjust any settings to meet your system requirements.
Info:
The
fi
rst screen that may appear when the SETUP button
is pushed is a password screen. If the PIN has been set under
the TECH button’s SETUP PIN menu item, the
fi
rst screen is the
Set SETUP PIN menu. The proper PIN must now be entered in
order to access the SETUP menus. After 5 minutes from the last
button push, the display automatically returns to the System
Home screen and the PIN must be reentered in order to access
the SETUP menus. Refer to the TECH button’s
SETUP PIN
menu
item to set or change the PIN number. Refer also to Section
3.2.4.1 for more info on accessory setup.
Info:
In any SETUP menu that contains a range of settings,
if the
fi
rst and last settings are equal (set to the same value)
the function will be disabled, even if selected/enabled from the
CTRL menu.
1 Router
2 Inverter
3 Charger
ALL SELECT Setup
SETUP Button
Press to
select
Press
SETUP
Rotate to
desired
selection:
Top 3 lines show menus
1 Router
2 Inverter
3 Charger
ALL SELECT Setup
01A Set Time
12 :00pm
ALL View RTR Setup
01B Display
Contrast 100%
Brightness 50%
ALL View RTR Setup
01H Aux Relay Timing
Close Delay 10
Open Delay 10
ALL View RTR Setup
…
Figure 3-5, SETUP Button
