© 2010 Magnum Energy, Inc.
42
3.0 Setup
Setting a new PIN
You can change your PIN at any time. However, to change an existing PIN, you
must first enter that PIN in order to access the
Set New PIN
menu item.
To set a new PIN
From the
Set Setup PIN, Pin=0***
menu:
Use the SELECT knob to enter the exisiting PIN (see the ‘Entering an
Exisitng PIN’ procedure on previous page).
Once the exisiting PIN is entered and you press SELECT for the last digit,
the
Set SETUP PIN
menu options appear.
Rotate the SELECT button to the
Set New Pin
menu option, and then
press the SELECT button. The
Set SETUP PIN
menu appears with the
current PIN displayed.
Enter the new PIN (see the ‘Setting a PIN’ procedure on previous page).
Note:
“0000” is not a valid PIN.
After pressing the SELECT knob for the last digit, the new PIN is set. You
are returned to the
Set SETUP PIN
menu where you can lock/unlock the
SETUP button menus.
Info:
There may be SETUP menus you want others to have
access to without giving away the PIN number. To do so, enter
the desired SETUP menus in the FAVS button before setting the
PIN number. Once you enter the SETUP menus in the FAVS button
the PIN number can then be entered, and the SETUP button will
be locked. The SETUP menus in FAVS are now accessible without
having to enter the PIN number. See the FAVS button section.
External Control (TECH 06):
External Control is a read only menu.
Magnum Energy has adopted an “open protocol” policy which allows
third party firmware companies to control certain functions of the
inverter/charger. This menu displays if any external device/software is
controlling the router. It is designed to help support personnel determine
if the inverter/charger is operating normally, or being controlled by a
third party.
No
- Indicates no third party network device is controlling the router.
Yes
- Indicates a third party network device is currently controlling one
of the allowable functions of the router. The function(s) that are being
controlled by a third party will be displayed as a number. This number can
be used by Magnum Tech Support to determine what code is controlling
the router.
Load System Defaults (TECH 07):
This menu restores factory defaults
to all settings on the inverter/charger and any settings on accessories
that are networked. To restore, continually press the rotary SELECT
knob for 5 seconds. After the default settings have been restored, the
display will show
“System Defaults Have Been Restored”
. Refer to the
menu maps on pages 43 -51 for default values.
Info:
For information on the factory default settings for any
networked accessory, refer to the owner’s manual for that
accessory.
Info:
If the PIN has been set and locked, it must be entered
before the
Load System Defaults
menu can be used.
1.
2.
3.
4.
5.
•
•
