Magni MM-410, Operator'S Manual, Page: 57 / 182

Operating the MM410/AVM-510A
6-9
Measurement
(Composite PAL, one each for Input A and Input B)
SELECT SET
510A-005
SYSTEM VIDEO
MEASURE LINE, 1/3:10 to 2/4:262
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOUR BARS/
100% COLOUR BARS/MULTIBURST/CCIR 17/330/
NATIONAL ITS/CCIR18
SYS VIDEO LIMITS
SYNC AMPL
BURST AMPL
PEAK VIDEO
PEAK LUMA
APL
NOISE
H BLANKING
H REF TIMING
BURST REF PHA
SC/H PHASE
H BLANKING LEVEL
COLOR SETUP
MEASURE LINE, 1/3:7 to 2/4:612
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOUR BARS/
100% COLOUR BARS/MULTIBURST/CCIR 17/330/
NATIONAL ITS/CCIR18
COLOUR LIMITS
WHITE BAR AMPL
SYNC AMPL
BURST AMPL,
RED AMPL
RED PHASE
YELLOW AMPL
YELLOW PHASE
GREEN AMPL
GREEN PHASE
BLUE AMPL
BLUE PHASE
FREQUENCY RESP
MEASURE LINE, 1/3:7 to 2/4:612
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOUR BARS/
100% COLOUR BARS/MULTIBURST/CCIR 17/330/
NATIONAL ITS/CCIR18
FREQ RESP LIMITS
SYNC AMPL
BURST AMPL
WHITE BAR AMPL
BLACK BAR AMPL
REFERENCE AMPL
0.5 MHz REF
1.0 MHz
2.0 MHz
4.0 MHz
4.8 MHz
5.8 MHz
MULTIBURST TIMINGS
WHITE BAR
BLACK BAR
Packet 1
Packet 2
Packet 3
Packet 4
Packet 5
Packet 6
PACKET FREQUENCIES
Packet 1 to 6
NON LINEAR
MEASURE LINE, 1/3:7 to 2/4:612
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOUR BARS/
100% COLOUR BARS/MULTIBURST/CCIR 17/330/
NATIONAL ITS/CCIR18
NON LINEAR LIMITS
BAR AMPL
SYNC AMPL
BURST AMPL
PEAK LUMA
NOISE
CHR/LUM GAIN
CHR/LUM DLY
CHROMA REF
DIFF PHASE
DIFF GAIN
LUM LINEARITY
P/B RATIO
K-2T FACTOR
AUTOMEASURE
MEASURE LINE, 1/3:10 to 2/4:262
NOISE LINE, 10 to 35
TIME
READOUT
TIME, ON/OFF
TIME SOURCE, AUTO SWITCH/
VITC TIMECODE/INTERNAL CLOCK
VITC LINE, 9 to 25
WAVEFORM
READOUTS
SC/H PHASE, ON/OFF
COLOR FRAME, ON/OFF
START/STOP TIME SETUP
START/STOP FUNCTION, ON/OFF
START REPORT TIME
HOURS, 0 to 23
MINUTES, 0 to 59
STOP REPORT TIME
HOURS, 0 to 23
MINUTES, 0 to 59
SCHEDULED REPORT INTERVAL,
0 OFF to 480 Minutes
ERROR REPORTING, ON/OFF
REPORT SUSTAINED ERRORS,
0 OFF to 60 Minutes
REPORT ALL ERRORS CLEAR, ON/OFF
REPORTING DELAY, ON/OFF
REPORT
AUDIO
OPTIONS
AUDIO METER, ON/OFF
REF LEVEL dB, -20 to 10
AUDIO REPORT
REPORTING, ON/OFF
HIGH AUDIO LIMIT
HIGH REPORT LIMIT, -20 to 10 dB
HIGH ALARM DELAY, 0 to 30 seconds
LOW AUDIO LIMIT
LOW REPORT LIMIT, -40 to -20 dB
LOW ALARM DELAY, 0 to 30 seconds
MULTIBURST ID, AUTO DETECT/
STANDARD/CUSTOM
RESPONSE TIME
(bar graph)
Note: Refer to "Parameters: Range, Accuracy, and Limits," in Chapter 10, for associated nominal values
Figure 6-3. A and B Measurements (Composite PAL)