Magni MM-410, Operator'S Manual, Page: 17 / 182

2-1
2
2. Product Overview
(MM-410)
MM-410 Waveform/Vector Rasterizing Monitor
The MM-410 Series monitors are dual standard (NTSC and PAL) and multi-format (Beta, MII, S-
Video, EBU, GBR). Separate A and B input selections provide for easy transitions between composite
and component monitoring. The MM-410 loop through inputs can be configured for:
•
Two composite or one composite and one S-video
•
One composite and one 3-wire component
Simultaneous display of both A and B channels provides for easy camera timing and color matching
required when:
•
Setting and balancing camera levels
•
Checking time base correctors
•
Assuring color fidelity and timing for editing
Magni’s patented raster technology with 10-bit signal processing provides accurate waveform and
vector displays on a standard color picture monitor. It allows viewing waveforms, with superior
display accuracy as the raster-based display is not subject to CRT errors.
Features include a unique split screen mode, providing picture, waveform, and vector on a single
display. You will appreciate the unique peak video over limit region identified in red. Other features,
like on-screen readouts of SC/H, phase, color frame indicator, and blanking graticule, make advanced
equipment setup easy for the experienced engineer. User friendly front panel control and 10 memory
pre-sets provide instant set-up recall such as composite parade of filters or component waveform
parade. Magnification and line select modes, enable viewing of VITS and a vertical blanking interval.
The MM-410 is a compact low-power design (1 RU) that fits the smallest editing suites or ENG vans.