1
PIPEMASTER MODEL 515 POWER SOURCE
FOR USE WITH GTAW PROCESS WELD HEADS
INTRODUCTION
The Pipemaster, Model 515, is a digital power source designed to be used with Magnatech D-Head®, T-Head®,
Quickclamp Head®, 424/425/426® model weld Heads. Internal memory and removable data media used for
program transfer are solid state. The Power Source is operated from a Remote Pendant, containing all controls.
Take Inventory. After receiving your system, please take an inventory of parts using the Packing List, or the
general inventory list detailed in Section 2.0.
READ AND OBSERVE WARNINGS BEFORE PROCEEDING WITH INSTALLATION!!
Read all warnings listed in Section 3.0 before connecting the Pipemaster to input power or attempting any welding!
Contact Magnatech technical staff if any questions exist concerning proper installation procedures.
COPYRIGHT NOTICE
This manual and the information contained herein is the property of Magnatech LLC. It is proprietary and shall not
be copied in whole or in part without the prior express written permission of Magnatech LLC.
Information and instructions in this document are subject to change and Magnatech LLC reserves the right to
change specifications and data without notice.
This document is based on the latest design version at the time of publication. Some deviations in actual operation,
from this document, are possible depending on the production generation of a particular machine.
Edition publication date – March 22, 2011. Copyright 2011 by Magnatech LLC all rights reserved.