34
8.2
For C-Series Models (819A - 823A); 800 Series Model (810 - 860); and R-Heads Models
(427A - 429A)
Autoprogram for these Heads operates similarly to the Heads listed in Section 8.1. The main
difference is that programming is Time-based, and each program is created in 4 levels.
8.3
Using Autotack for 800 Series, C-Series, and R-Heads
Tack welding is useful when welding larger diameter tubes. Autotack will automatically
generate a tack-welding program. Select 4 or 8 equally spaced tacks. Tacking parameters
will penetrate approximately 70% of the tube wall.
ATTENTION:
Do not use QC with Autotack.