30
8.0
USING AUTOPROGRAM
8.1
For D-Head Model 420, Quickclamp Heads Model 432, 433
Autoprogram for these multipass Heads always uses position-based programming. Each
pass is divided into six levels. Certain defaults are automatically selected (for example,
Prepurge is always 5 seconds). To change these defaults, edit the weld program after it is
generated.
The Autoprogram feature will only create a maximum of 5 passes (rotations around the
pipe), which should allow weld thicknesses up to 12.7mm (0.5") to be programmed. For
heavier walls, create a new weld program and slightly increase Pass 5 parameters oscillation
parameters for each subsequent pass.
Select Yes with Encoder. Press Next.
If Password Protection has been applied, you will be asked for your password to continue.
Select New Weld Program Number using Encoder. Press Next when finished. Use Back to
move to prior screen.