32
Override Limit Function
The welder may override any of the preprogrammed values, but only within limits that may be
defined during programming. The percentage of override limits can be individually programmed
for each parameter between 0-100% of the programmed value. Welders can be given sufficient
override capacity to compensate for tube fit variations, for example, but be prevented from
modifying the original program outside of specified heat input limitations, for example. The
override limits are saved with each weld thus allowing for different override values based on
which weld is being run.
Use Cursor to select line, Encoder to modify.
Weld Notes
Use Cursor to select item, Encoder to modify.
Note
: Certain items have been previously selected and cannot be changed (i.e., Weld No.,
Data, O.D., etc.). The cursor will bypass these items.
Note
: To add description under Project and Drawing, see Section 9.0 on Alphanumeric
Labeling.