MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION, Manual

Page: 341 / 372

Using btadmin 323
The following table describes the
btadmin
options for changing the ClusterCATS
settings:
For Netscape Web servers, enter the Web server instance as
https-<server>
. For
Apache Web servers enter
https-<hostname>
.
You can enable, disable and configure the following ClusterCATS options using the
btadmin
utility:
The following examples show how to use
btadmin
utility:
btadmin add https-myserver
btadmin enable btcats https-myserver
btadmin disable failover https-myserver
btadmin config load https-myserver
[show]
Use the
show
option to display the currently enabled ClusterCATS configuration
settings.
[reset]
Use the
reset
option to reinitialize your cluster configuration settings on the current
server. For more information on the effects of resetting a cluster member, refer to
“Resetting Cluster Members” on page 319 .
Option Description
enable Enable the specified option for a Web server instance.
disable Disable the specified option for a Web server instance.
add Add a new Web server instance.
delete Delete an existing Web server instance.
config Configure a specified option for an instance.
btadmin
prompts you for additional information when using the
config option.
Option Description
btcats Configures the ClusterCATS Server.
dfp Configures Cisco LocalDirector’s Dynamic Feedback Protocol.
failover Configures the ClusterCATS failover (ipaliasd) support.
load Configures the load balancing preferences.
wsroot Configures a Web server root directory in case you upgrade your
installation or move the root directory.
wsprobe Configures the Web server probes.