MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION, Manual

Page: 46 / 372

28 Chapter 1 Advanced Data Source Management
2 You must uncompress and/or untar this file into a separate subdirectory on your
server; for example: /opt/isdk.
This is the directory that you point to in the start script as INFORMIXDIR.
3 Run the script installclientsdk to install the client SDK.
4 Before you continue, verify that you can connect to the Informix server from a
client other than ColdFusion or with a utility such as
iconnect .
Editing the ColdFusion start script
Add the following lines to the coldfusion/bin/start script:
# Informix client directory
INFORMIXDIR=/opt/isdk;export INFORMIXDIR
INFORMIXSERVER=alldevtli;export INFORMIXSERVER
INFORMIXSQLHOSTS=$INFORMIXDIR/etc/sqlhosts;export INFORMIXSQLHOSTS
LD_LIBRARY_PATH=/usr/dt/lib:/lib:/usr/openwin/lib:$CFHOME/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$INFORMIXDIR/lib:$INFORMIXDIR/lib/esql
Editing the SQLHOSTS file
Add the following lines to the sqlhosts file:
dbserver nettype hostname service name
alldev onipcshm alldev online0
alldevtli ontlitcp alldev turbo
The following table describes the code and its functions:
Editing the /etc/services or NIS file
Edit your /etc/services or master NIS file so that it contains a line like this:
turbo 1526/tcp
Code Description
dbserver This name matches the value in your Informix server /etc/onconfig
file, and also matches the INFORMIXSERVER environment
variable in your /coldfusion/bin/start script.
nettype Determines what kind of network protocol to connect with.
hostname The hostname of the server where the database is. You can put the
IP address or hostname.
service name The entry in the /etc/services or master NIS file for the port that
informix listens on. This can also be the port# for the service name,
such as 1526.