MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION, Manual, Page: 321 / 372

Administrating Security 303
To configure authentication modes for your clusters:
1 Create a user account on each server within your cluster for each administrator
that you want to be able to administer the servers using the ClusterCATS
Explorer.
For Unix, you must be a member of "sys" group. For Windows NT, you must be a
member of "admin" group.
If your cluster members are NT servers, use the Windows User Manager utility to
create your user accounts.
Note
If only one person will administer all cluster members in the cluster, be sure to
create the same user account (identical user name and password) on each cluster
member. The ClusterCATS Explorer will consequently prompt you only once for a
user name and password. However, if multiple, different administrator accounts
are created on each server, ClusterCATS Explorer will display user name and
password prompts upon each attempt to access the servers from the ClusterCATS
Explorer.
2 Open the ClusterCATS Explorer and select a cluster.
3 Select Configure > Administration or select Cluster > Properties . Both menu
selections display the Properties dialog box. Alternatively, you can right-click the
cluster and select
Configure > Administration .
The Properties dialog box appears:
4 Select Local User from the Mode drop-down box.
5 Enter a user name and password defined for a valid account.