UNLOADING AND ASSEMBLY
Form # 169080
Model Year - 2010
36
STEP 22. INSTALL OPTIONS
A. TALL CROP DIVIDER KIT
a. Unpack kit and remove the three bolts and
nuts indicated.
b. Open
cutterbar
doors.
c. Locate LH divider (A) on header LH front
corner and install with three bolts and nuts in
existing holes. Tighten hardware.
d. Repeat for RH side.
B. SHOE LIFT KIT
a. Unpack
kit.
b. Start tractor and raise header fully.
WARNING
To avoid bodily injury or death from
unexpected start-up or fall of raised
machine, stop engine, remove key and
engage lift cylinder stops before going
under machine for any reason.
c. Stop engine, remove key, and engage lift cylinder
valves.
d. Install a lift on each of the two end skid shoes,
and on two additional shoes at equi-distant
locations as follows:
1. Remove two bolts (C), pivot skid shoe (D),
and remove from slot (E) in rock guard.
2. Attach shoe lift (F) to skid shoe as shown with
hardware (G) supplied in kit. Tighten bolts.
3. Position skid shoe (D) joggled end in rock
guard slot (E) and locate aft end with lift (F)
against rock guard. Secure with existing bolts
(C).
G
D
F
D
C
E
A
B
