UNLOADING AND ASSEMBLY
Form # 169080
Model Year - 2010
21
STEP 15. ATTACH MOWER
CONDITIONER TO
TRACTOR
CAUTION
Shut off tractor, engage parking brake and
remove key before working around hitch.
A. DRAWBAR TYPE HITCH
I.
SETUP THE DRAWBAR
Adjust tractor drawbar to meet ASAE Standard
specifications as listed below.
DIMENSION
1000 RPM PTO
1.37” DIA.
1.75” DIA.
X
16 in. (406 mm)
20 in. (508 mm)
Y
6-12 in. (152-305 mm)
8 in. (203 mm) Recommended
Z
13-17 in. (330-432 mm)
16 in. (406 mm) Recommended
II.
ATTACH DRAWBAR EXTENSION
a. Secure the drawbar so the hitch-pin hole is
directly below the driveline.
b. Unpack hitch parts bundle.
c. Attach the drawbar extension (A) to the tractor
drawbar as follows and as shown:
1. Loosen bolts (B) on extension assembly and
slide onto drawbar. Install pin (C).
2. Tighten the four bolts to 265 ft-lbf (359 N·m).
CAUTION
Never attach mower-conditioner to tractor rear
axle or three-point hitch arms.
d. Attach the swivel hitch member (D) with pin (E)
onto the mower-conditioner APT.
(continued next page)
A
C
B
Y
Z
TRACTOR
DRAWBAR
PTO
X
GROUND
E
D
