PRE-DELIVERY CHECKS
Form # 169080
Model Year - 2010
44
B. CONDITIONER ROLLS
WARNING
Stop tractor engine and remove key before
making adjustments to machine. A child or
even a pet could engage the drive.
I. ROLL
GAP
The amount of thread protruding through jam nut
should equal roll gap. Factory setting should be
0.25 in. (6 mm) at each adjuster bolt.
II. ROLL
TIMING
a. Lower header to ground, shut down tractor and
remove key.
b. Remove bolt (A) and nut, and remove gauge (B)
from inside panel at RH end of header.
c. From behind the header, locate gauge at center
of rolls as shown and manually turn rolls to limits
of gauge. Rolls will engage the gauge if timing
is correct.
d. Check timing flange bolts (C) are tight.
e. Manually turn rolls in opposite direction to
release gauge.
f. Replace gauge (B) in header with bolt (A) and
nut.
A
B
START POSITION
GAUGE POSITION
B
B
C
0.25 in. (6 mm)
CROP
TIMING GAP
ROLL GAP
CROP
