MacDon PW8, Unloading And Assembly Instructions

Page: 69 / 170

214658
61
Revision A
1006714
A
B
C
D
Figure 5.16: Locking Feeder House
13. Pull handle (A) from vertical to fully horizontal position
to fully engage multicoupler and to extend pins (B) at
the base of the feeder house into locking plates (C).
Knob (D) will engage lock handle.
1006654
A
B
C
Figure 5.17: Aligning Locking Plates
NOTE:
If handle does not move to fully horizontal position,
check alignment of locking plates (A) on the header with
locking pins (B) on both sides of the feeder house. If
necessary, loosen nuts (C) and adjust plates (A) to line
up with pins (B). Retighten nuts.
14. Remove draper deck shipping braces. Refer to 5.5
Removing Deck Shipping Braces, page 71 .
ATTACHING HEADER TO COMBINE