MacDon PW8, Unloading And Assembly Instructions

Page: 34 / 170

214658
26
Revision A
3.7 Setting Caster Wheels to Field/Working Position
Headers can be ordered with either fixed wheels or caster wheels. For instructions about positioning fixed wheels in
field/working position, refer to
3.6 Setting Fixed Wheels to Field/Working Position, page 25 .
1022327
A
B
Figure 3.27: Right Side Header Wheel
1. Locate the right caster assembly (A).
2. Remove bolts (B) and caster wheel support (A).
1022472
A
B
C
D
Figure 3.28: Right Side Header Wheel
3. Position caster wheel support (A), until it aligns with the
header frame at location (C).
4. Install bolts (B), and torque to 68.5 Nm (50.5 lbf ft).
5. Remove bolt (D) from the lower hole.
1022328
A
B
Figure 3.29: Right Side Header Wheel
6. Rotate the caster assembly (B) until the upper holes
align. Insert bolt (A) and washers to secure. Torque nut
to 234 Nm (173 lbf ft).
7. Repeat on left side of the header.
UNLOADING THE HEADER