MacDon PW8, Unloading And Assembly Instructions

Page: 167 / 170

214658
159
Revision A
Predelivery Checklist
After completing setup and adjustment procedures, perform these checks before delivery to your Customer. If
further adjustments are required, refer to the appropriate page number in this manual. The completed Checklist
should be retained by either the Operator or the Dealer.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to
hazards and unsafe practices.
Header Serial Number: ________________________
ü ü
Item Reference
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
—
Check for loose hardware. Tighten to specified torque. 7.3 Torque Specifications, page 150
Check that wheels are in field (working) position.
3.6 Setting Fixed Wheels to Field/Working
Position, page 25
Check if tire air pressure is 240
–
310 kPa (35
–
45 psi).
Adjust as required.
6.2.1 Inflating Tire, page 136
Check that hold-down is set in the field/working position.
3.8 Extending Hold-Down to Field/Working
Position, page 27
Check if the machine is completely lubricated. 6.4.1 Lubricating the Header, page 141
Check draper belt tension. 6.3 Checking Draper Belt Tension, page 137
Check that transport lights (if installed) are extended.
3.9 Adjusting Transport Lights, page 28
Check that height sensor is calibrated.
6.1 Auto Header Height Control (AHHC) System
Overview, page 73
Run-Up Procedure
Check hydraulic hose and wiring harness routing for
clearance problems when raising or lowering the header
and hold-down bar.
—
Check that hold-down is level when fully raised. 6.7 Running up the Header, page 146
Check that draper speed sensor is working. Refer to combine operator
’
s manual
Check that height controller is working. 6.7 Running up the Header, page 146
Check that transport lights (if installed) are functional. Refer to combine operator
’
s manual
Post Run-Up Checks. Stop Engine.
Check drives for heated bearings.
—
Check for hydraulic leaks.
—
Check that manual storage case contains PW8 Pick-Up
Header Operator
’
s Manual and Parts Catalog.
6.5 Manuals, page 144
Date Checked: Checked by: