PRE-DELIVERY CHECKS
Form # 169242
Model Year - 2009
77
b. Check spring clamp at back of air cleaner
(M150, M200).
c. Check spring clamps on charge air cooling duct
connections (at turbocharger outlet, engine
intake and inside cooling box).
E. HYDRAULIC OIL LEVEL
a. Turn filler cap counterclockwise to loosen bung,
and remove dipstick.
b. Check that level is between LOW and FULL
marks.
c. Reinstall filler cap and turn clockwise to tighten
bung.
F. FUEL SEPARATOR
a. Turn drain valve by hand 1½ to 2 turns
counterclockwise until draining occurs.
b. Drain the filter sump of water and sediment until
clear fuel is visible. Clean as necessary.
c. Turn the valve clockwise to close the drain.
M200
M100 & M150
HOLD 0.018 in. (0.46 mm)
GAUGE BETWEEN MIDDLE
COILS & TIGHTEN CLAMP
UNTIL GAUGE IS SNUG
TYPICAL CONNECTION