UNLOADING AND ASSEMBLY
Form # 169242
Model Year - 2009
27
STEP 14. INSTALL HYDRAULICS
A. M150, M200
a. The hydraulic hoses under the cab may require
proper placement under the existing clip. If
necessary, proceed as follows:
1. Locate hose clip under the cab and remove
clip.
2. Position the two hoses 111323 (orange tie)
and 111324 with tee (white ties), (three if
M200) as shown under the center of the clip
and loosely install two bolts and nuts. Part
numbers are located on hoses.
3. Position remaining hoses under clip as
shown and tighten bolts.
b. Connect hoses as follows using coloured plastic
cable ties as a guide.
1. Locate two hoses 111327 (green ties) in
frame opening, and existing tee fitting (green
tie).
2. Remove caps on green lines and tee, and
make connections. Tighten fittings.
NOTE
Remove caps on tee last to minimize
oil loss.
3. Position hoses into frame.
4. Locate two hoses (white ties) inside frame
and hose 111324 with tee (white tie).
5. Remove caps, make connections, and
tighten fittings.
6. Push hoses into frame.
(continued next page)
111327 GREEN
111324 WHITE ‘T’
VIEW FORWARD
111323 BLUE
111324 WHITE ‘T’
111327 GREEN ‘T’
111328 WHITE
111557 YELLOW
111323 ORANGE
111324 (M200 ONLY)
(NOT SHOWN)
